How Far Should Shingles Overhang The Rake. Shingles should be installed over the drip edge a minimum of 3/8” (9 mm) at both the eave edge. If you do not have a drip edge flashing installed, shingles should overhang an inch to an inch and a half. If the shingles are allowed to extend too far, then they can be caught by the wind. If shingles overhang the edge of the roof by more than 3/4”. The amount of overhang on my new screened in. Ideally, you’d nail about every 12 inches, and in no circumstances should you. How much overhang should roof shingles have? Once the drip edge is installed, the shingles should extend ½ inch to ¾ inch past the drip edge. Nosing and grip edge flashing should have an overhang of about 1/2 to no more than 1 inch. Some manufacturers may be more restrictive with that measurement. How should shingles be installed over drip edge? The box of shingles states 1/2 overhang with a drip edge, 3/4 without. Nail high up on the drip edge so that the shingles will cover the nails. Shingles should not extend more than 3/4” (19 mm) past the drip edge.
from www.nachi.org
If you do not have a drip edge flashing installed, shingles should overhang an inch to an inch and a half. The box of shingles states 1/2 overhang with a drip edge, 3/4 without. Nosing and grip edge flashing should have an overhang of about 1/2 to no more than 1 inch. Shingles should not extend more than 3/4” (19 mm) past the drip edge. Ideally, you’d nail about every 12 inches, and in no circumstances should you. How much overhang should roof shingles have? Some manufacturers may be more restrictive with that measurement. The amount of overhang on my new screened in. Shingles should be installed over the drip edge a minimum of 3/8” (9 mm) at both the eave edge. If shingles overhang the edge of the roof by more than 3/4”.
Roof Edge, No Overhang Inspection Gallery InterNACHI®
How Far Should Shingles Overhang The Rake Shingles should not extend more than 3/4” (19 mm) past the drip edge. Shingles should not extend more than 3/4” (19 mm) past the drip edge. If the shingles are allowed to extend too far, then they can be caught by the wind. Nail high up on the drip edge so that the shingles will cover the nails. Some manufacturers may be more restrictive with that measurement. The amount of overhang on my new screened in. If shingles overhang the edge of the roof by more than 3/4”. If you do not have a drip edge flashing installed, shingles should overhang an inch to an inch and a half. How much overhang should roof shingles have? Once the drip edge is installed, the shingles should extend ½ inch to ¾ inch past the drip edge. Shingles should be installed over the drip edge a minimum of 3/8” (9 mm) at both the eave edge. The box of shingles states 1/2 overhang with a drip edge, 3/4 without. How should shingles be installed over drip edge? Ideally, you’d nail about every 12 inches, and in no circumstances should you. Nosing and grip edge flashing should have an overhang of about 1/2 to no more than 1 inch.
